Aerosoft PRO Support In this tutorial we will explain how to install SkalarkiIO Profiler to work with Aerosoft Airbus PRO line. Supported models are A319, A320, A321, A330. |
SkalarkiIO Profiler 5.1 Installation for Aerosoft PRO Support
SkalarkiIO Profiler is an Application to allow communication between SKALARKI hardware and aircraft or simulation software. All SKALARKI hardware can be used ONLY via SkalarkiIO Profiler and dedicated digitally signed USB driver. Registering SkalarkiIO Profiler is mandatory and it is free of charge for Home Users. Any commercial aplication is allowed only after purchasing related Licence. All licences are available in our Online Shop here.
1. Installation Procedure
1. After downloading SkalarkiIO Profiler 5.1 run the installer.
2. Click "Next" to move to the next step. In thi example we will install Aerosoft PRO A320-A321. Procedure for other versions is the same.
3. Choose Aerosoft PRO A320-A321 component to install. Click on small blue arrow to open context menu and pick "Will be installed on local hard drive" option.
4. Click "Next" button to move to the next step:
5. In this step Installer will search registry to find find automatically Aerosoft aircrafts installation folder.
6. In case you want to change default Profiler installation folder, it can be done in "Installation Folder" tab. We strongly recommend to keep Profiler in default location. Once done click "Next".
7. Click "Install" to proceed with installation. Installer will install all elements automatically.
8. When installation is completed press "Finish" button.
9. By default Profiler will start with the Windows and will be minimised to system tray. If you start Profiler manually it will be minnised as well. To bring it back on screen please find Profielr icon in system tray and double click on it or right click on the icon, then choose "Recover" and Profiler will show on screen.
There is no need to add or edit any files manually. Non of the files needs to be moved or copied to p3d folders.
2. Configuration
Before you will use hardware, please check Settings and do controls calibration if you have supported hardware from SKALARKI. First make sure your Aircraft and hardware versions are set correctly.
3. Controls Calibration
Then if you have hardware like DESKTOPLine TQ box do calibration.
Please make sure hardware is connected and USB driver installed. Device box must be green in Profiler main window.To calibrate any lever, please move it to the posisiotn and then click corresponding button to save lever position. Calibration needs to be done only once. Please check settings and calibration after Profiler updates or reinstallation.
Aerosoft Airbus PRO - Aircraft installation
Aerosoft Airbus PRO needs to be installed as any other standard p3d aircraft. Follow Installer messages and in case of problems refer to aircraft developer installation guide. There is nothing specific to set during aircraft installation, which would be related to SKALARKI hardware or software.